Cisco 642-885 Exam Review Questions – Updated 2018

Customizable learning to have an estimation of time for each 642-885 question and to have a good understanding of the each Cisco 642-885 question’s pattern is possible by preparing with the Cisco 642-885 exam questions. PDF booklet provides you the most updated Cisco Certified Network Professional Service Provider 642-885 questions from the entire curriculum and the opportunity to practice those questions is available in the software so you have a complete package of Cisco Certified Network Professional Service Provider exam preparation for guaranteed success. Money back guarantee, MacAfee Secure payment, free demo, 90 days free updates for Cisco Certified Network Professional Service Provider 642-885 exam and much more just for you !

♥♥ 2018 NEW RECOMMEND 642-885 Exam Questions ♥♥

642-885 exam questions, 642-885 PDF dumps; 642-885 exam dumps:: https://www.dumpsschool.com/642-885-exam-dumps.html (131 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)

Latest and Most Accurate Cisco 642-885 Dumps Exam Questions and Answers:

Question: 21

Refer to the Cisco IOS DHCPv6 configuration shown in the exhibit.

Which statement is correct?

A. The configuration is missing a command under interface Gi0/1 to indicate to the attached hosts to use stateful DHCPv6 to obtain their IPv6 addresses
B. The IPv6 router advertisements indicate to the attached hosts on the Gi0/1 interface to get other information besides their IPv6 address via stateless auto configuration
C. The IPv6 DHCPv6 server pool configuration is misconfigured
D. The DNS server address can also be imported from another upstream DHCPv6 server

Answer: A

Explanation:
Server Configuration
In Global Configuration Mode
ipv6 unciast-routing
ipv6 dhcp pool address prefix lifetime
dns-server
domain-name
exit
In Interface Configuration Mode
ipv6 address
ipv6 dhcp server rapid-commit
Client Configuration
In Global Configuration Mode
enable
configure terminal
ipv6 unicast-routing
In Interface Configuration Mode
ipv6 address dhcp rapid commit
ipv6 enable
exit

Question: 22

Which IPv6 mechanism occurs between a provider edge router and the customer premises equipment router to allow an ISP to automate the process of assigning a block of IPv6 addresses to a customer for use within the customer network?

A. Router Advertisement
B. DHCPv6 Prefix Delegation
C. DHCPv6 Lite
D. Stateful DHCPv6

Answer: B

Explanation:
http://www.cisco.com/en/US/tech/tk872/technologies_configuration_example09186a0080b8a116.shtml

Question: 23

Which two BGP mechanisms are used to prevent routing loops when using a design with redundant route reflectors? (Choose two.)

A. Cluster-list
B. AS-Path
C. Originator ID
D. Community
E. Origin

Answer: A, C

Explanation:
http://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.7/routing/configuration/guide/rc37bgp.html
As the iBGP learned routes are reflected, routing information may loop. The route reflector model has the following mechanisms to avoid routing loops:
•Originator ID is an optional, nontransitive BGP attribute. It is a 4-byte attributed created by a route reflector.
The attribute carries the router ID of the originator of the route in the local autonomous system. Therefore, if a misconfiguration causes routing information to come back to the originator, the information is ignored.
•Cluster-list is an optional, nontransitive BGP attribute. It is a sequence of cluster IDs that the route has passed. When a route reflector reflects a route from its clients to nonclient peers, and vice versa, it appends the local cluster ID to the cluster-list. If the cluster-list is empty, a new cluster-list is created. Using this attribute, a route reflector can identify if routing information is looped back to the same cluster due to misconfiguration. If the local cluster ID is found in the cluster-list, the advertisement is ignored.

Question: 24

Which two statements correctly describe the BGP ttl-security feature? (Choose two.)

A. This feature protects the BGP processes from CPU utilization-based attacks from EBGP neighbors which can be multiple hops away
B. This feature prevents IBGP sessions with non-directly connected IBGP neighbors
C. This feature will cause the EBGP updates from the router to be sent using a TTL of 1
D. This feature needs to be configured on each participating BGP router
E. This feature is used together with the ebgp-multihop command

Answer: A, D

Explanation:
http://packetlife.net/blog/2009/nov/23/understanding-bgp-ttl-security/

Question: 25

When implementing source-based remote-triggered black hole filtering, which two configurations are required on the edge routers that are not the signaling router? (Choose two.)

A. A static route to a prefix that is not used in the network with a next hop set to the Null0 interface
B. A static route pointing to the IP address of the attacker
C. uRPF on all external facing interfaces at the edge routers
D. Redistribution into BGP of the static route that points to the IP address of the attacker
E. A route policy to set the redistributed static routes with the no-export BGP community

Answer: A, C

Explanation:
Source-Based RTBH Filtering
With destination-based black holing, all traffic to a specific destination is dropped after the black hole has been activated, regardless of where it is coming from. Obviously, this could include legitimate traffic destined for the target. Source-based black holes provide the ability to drop traffic at the network edge based on a specific source address or range of source addresses.
If the source address (or range of addresses) of the attack can be identified (spoofed or not), it would be better to drop all traffic at the edge based on the source address, regardless of the destination address. This would permit legitimate traffic from other sources to reach the target. Implementation of source-based black hole filtering depends on Unicast Reverse Path Forwarding (uRPF), most often loose mode uRPF.
Loose mode uRPF checks the packet and forwards it if there is a route entry for the source IP of the incoming packet in the router forwarding information base (FIB). If the router does not have an FIB entry for the source IP address, or if the entry points to a null interface, the Reverse Path Forwarding (RPF) check fails and the packet is dropped, as shown in Figure 2. Because uRPF validates a source IP address against its FIB entry, dropping traffic from specific source addresses is accomplished by configuring loose mode uRPF on the external interface and ensuring the RPF check fails by inserting a route to the source with a next hop of Null0.
This can be done by using a trigger device to send IBGP updates. These updates set the next hop for the source IP to an unused IP address that has a static entry at the edge, setting it to null as shown in Figure 2.

Question: 26

Refer to the topology diagram shown in the exhibit and the partial configurations shown below.

Once the attack from 209.165.201.144/28 to 209.165.202.128/28 has been detected, which additional configurations are required on the P1 IOS-XR router to implement source-based remote-triggered black hole filtering?
!
router bgp 123
address-family ipv4 unicast
redistribute static route-policy test
!

A. router static
address-family ipv4 unicast
209.165.202.128/28 null0 tag 666
192.0.2.1/32 null0 tag 667
!
route-policy test
if tag is 666 then
set next-hop 192.0.2.1
endif
if tag is 667 then
set community (no-export)
endif
end-policy
!
B. router static
address-family ipv4 unicast
209.165.201.144/28 null0 tag 666
192.0.2.1/32 null0 tag 667
!
route-policy test
if tag is 666 then
set next-hop 192.0.2.1
endif
if tag is 667 then
set community (no-export)
endif
end-policy
!
C. router static
address-family ipv4 unicast
209.165.201.144/28 null0 tag 666
192.0.2.1/32 null0
!
route-policy test
if tag is 666 then
set next-hop 192.0.2.1
set community (no-export)
endif
end-policy
D. router static
address-family ipv4 unicast
209.165.202.128/28 null0 tag 666
192.0.2.1/32 null0
!
route-policy test
if tag is 666 then
set next-hop 192.0.2.1
set community (no-export)
endif
end-policy
!

Answer: C

New Updated 642-885 Exam Questions 642-885 PDF dumps 642-885 practice exam dumps: https://www.dumpsschool.com/642-885-exam-dumps.html