Certified Wireless Design Professional CWDP-302 Exam Question And Answer

70-698 Exam Dumps

Customizable learning to have an estimation of time for each CWNP CWDP-302 question and to have a good understanding of the each CWNP CWDP-302 question’s pattern is possible by preparing with the CWNP CWDP-302 exam questions. PDF booklet provides you the most valid CWDP – Certified Wireless Design Professional CWNP CWDP-302 questions from the entire curriculum and the opportunity to practice those questions is available in the software so you have a complete package of CWDP – Certified Wireless Design Professional exam preparation for guaranteed success. Money back guarantee, MacAfee Secure payment, free demo, 90 days free updates for CWDP – Certified Wireless Design Professional CWNP CWDP-302 exam and much more just for you !

Vendor CWNP
Exam Code CWDP-302
Full Exam Name CWDP – Certified Wireless Design Professional
Certification Name Certified Wireless Design Professional
Technology

♥ 2018 Valid CWDP-302 Exam Questions♥

CWDP-302 exam questions, CWDP-302 PDF dumps; CWDP-302 exam dumps: CWDP-302 Exam Question (120 Q&A) (New Questions Are 100% Available! Also Free Practice Test Software!)

Latest and Most Accurate CWNP CWDP-302 Exam Questions:

Version: 8.0
Question: 1

You have determined the best mounting locations for APs in a given installation. The facilities
manager has asked you to change the locations for several APs due to aesthetic concerns. You
suggest mounting the APs in the ideal locations and painting them so they go unnoticed in the
environment.
What is a valid recommendation or consideration when painting APs?

A. Always use paints with metallic dye in them to prevent potential RF propagation impact.
B. Painting APs will significantly reduce the output power.
C. Painting APs may void the product manufacturer’s warranty.
D. Most AP models for indoor environments come in a variety of form factors and colors. Painting is
never recommended.

Answer: C

Question: 2

When deploying long-distance 802.11 bridge links (10 miles / 16 km), what parameter may be critical
for improving data flow by reducing retries caused by the long distances?

A. The sequence control field value
B. The acknowledgement timeout threshold
C. The minimum transmit data rate value
D. The CTS-to-self threshold

Answer: B

Question: 3

One of your customers plans on providing wireless coverage to a warehouse facility. After performing
an initial walkthrough, you collect the following information:
The central part of the warehouse is between 400 and 600 feet (122 to 183 meters) from the
warehouse switches mounted on the walls.
The warehouse storage is composed of metallic racks with varying inventory levels and contents,
from electronics and plastic toys to food pallets and juice bottles.
Workers need basic data coverage from their working location, and are not highly mobile. They
usually work from one single aisle, and their laptop is on a cart with wheels.
What would be your one recommendation to provide coverage to the central area of the warehouse?

A. Equip workers laptops with a directional antenna and install APs less than 328 feet (100m) away
from the switch.
B. In this case, extend the cable length just beyond 328 feet (100 m) and position APs as close as
possible to the central area of the warehouse.
C. Position APs along the walls, and equip the APs with Yagi antennas to cover the central area.
D. Install APs for client access in the central area and use a mesh backhaul link to connect to the DS.

Answer: D

Question: 4

Which definition correctly describes the “local MAC” variation of the centralized WLAN architecture?

A. All MAC functions are performed by the AP. A minimal subset of network control is offloaded to
the WLAN controller along with management and monitoring functions.
B. PHY functions are performed directly by the AP. MAC functions are divided almost equally
between the WLAN controller and the AP, according to the time sensitivity of the feature or service.
C. The AP provides the RF termination point for the WLAN, but performs very few of the WLAN
functions or services. The WLAN controller performs all MAC functions and the AP is very simple and
lightweight.
D. All RF-, data-, and control-related WLAN functions are performed by the AP. APs coordinate
network services with one another and are managed by a WNMS, so no WLAN controller is used in
this architecture.

Answer: A

Question: 5

When a WLAN controller sends an 802.11 frame to a lightweight AP for transmission on the wireless
medium, how does it mark the frame for 802.11 QoS priority?

A. The WLAN controller will place the user priority (UP) value in the QoS Control field of the 802.11
frame header before passing it to the lightweight AP.
B. The WLAN controller does not mark 802.11 frames with priority values only the APs can do this.
C. The WLAN controller does not mark the 802.11 frames with priority values only the Layer 3
switches can do this.
D. The WLAN controller does not mark the 802.11 frames with priority values only the Layer 3 routers
can do this.

Answer: A

Question: 6

When selecting a centralized WLAN architecture, what new problem may arise when you change the
data forwarding model from centralized to distributed?

A. APs that were designed for a centralized forwarding model may not support all features in
distributed forwarding mode.
B. The router between the APs and the controller must be made aware of the APs as forwarding
client STAs.
C. All RRM controls will also need to be distributed to a master AP that acts as a channel and transmit
power arbiter for other APs in the ESS.
D. Centralized control functions, such as key management and distribution, RRM, and load balancing
will no longer be supported.

Answer: A

New Updated CWDP-302 Exam Questions CWDP-302 PDF dumps CWDP-302 practice exam dumps: https://www.dumpsschool.com/CWDP-302-exam-dumps.html