Ec1-350

Question No. 1

Which parameter can be configured during the initial system setup of Cisco UCS Fabric Interconnect from the CLI, without restoring the configuration from an existing backup?

• A. the server ports, network ports, and storage ports
• B. the reserved VLAN IDs
• C. the default number of dynamic vNICs
• D. standalone mode or cluster mode of the fabric interconnects

Question No. 2

Which item represents a secure method of transmitting fault data with Cisco Call Home?

• A. Cisco Transport Gateway
• B. RSA Digital Certificate
• C. IPsec
• D. secure XML

Question No. 3

How many certificates does Cisco Unified Computing System Manager have to export to communicate with VMware vCenter server if the VMware ESXi hosts are all running version 5.0 or higher?

• A. 1
• B. 2
• C. 4
• D. 8
• F. 16

Question No. 4

Which two prerequisites are required to configure a SAN boot from the iSCSI storage of a Cisco UCS system? (Choose two.)

• A. There must be FCIP connectivity between the Cisco UCS domain and the boot target storage.
• B. There must be IP connectivity between the Cisco UCS domain and the boot target storage.
• C. The operating system to boot must be iBFT-capable.
• D. There must be a group of IP addresses that is associated with the WWN pool.
• E. The operating system to boot must be an iSCSI initiator and must he target-capable.

Question No. 5

Scenario

In this scenario, you will refer to screenshots about Cisco UCS B-Series servers and UCS Manager.

Instructions

To access the multiple-choice questions, click on the numbered boxes on the left of the top panel. There are four multiple-choice questions with this task. Be sure to answer all four questions before selecting the Next button.

Refer to the screenshot in Exhibit 3. Which tab would you choose to determine that a user failed to login to Cisco IMC?

• A. Fault Summary
• B. System Event Log
• C. CIMC Log
• D. Logging Controls

Question No. 6

A server discovery policy is defined in Cisco UCS Manager.

Which two actions are initiated by the policy when a new server starts? (Choose two.)

• A. The qualification in the server discovery policy is executed against the server.
• B. The scrub policy is applied to the server, if configured.
• C. A service profile is created for the server with the identity burned into the server at time of manufacture.
• D. The inventory of the server is analyzed.
• E. The server is assigned to the selected organization, if configured.

Question No. 7

Which two protocols enable you to download a firmware image from a remote location to a Cisco UCS Fabric Interconnect? (Choose two)

• A. HTTPS
• B. HTTP
• C. RDP
• D. SCP
• E. TFTP

Question No. 8

Which tool provides automated support capability that provides continuous monitoring, proactive diagnostics, alerts, and remediation recommendations?

• A. Cisco Smart Call Home
• B. snmp
• C. Cisco Director
• D. Cisco Threat Gateway

Question No. 9

Which of the following is true concerning Fibre Channel communications on a Cisco Unified Computing System?

• A. Each VSAN requires a dedicated VLAN to carry FCoE traffic.
• B. FCoE VLANs are created like Ethernet VLANs on Cisco Unified Computing System Manager.
• C. FCoE VLANs may overlap with Ethernet VLANs.
• D. Cisco Unified Computing System Manager supports a maximum of 128 active VSANs.

Question No. 1

How does a dynamic vNIC get allocated?

• A. Dynamic vNICs are assigned to VMs in VMware vCenter.
• B. Dynamic vNICs can only be bound to the service profile through an updating template.
• C. Dynamic vNICs are bound directly to a service profile.
• D. Dynamic vNICs are assigned by binding a port profile to the service profile.

Question No. 2

How many certificates does Cisco Unified Computing System Manager have to export to communicate with VMware vCenter server if the VMware ESXi hosts are all running version 5.0 or higher?

• A. 1
• B. 2
• C. 4
• D. 8
• F. 16

Question No. 3

Which two Cisco UCS C-Series server components are hot-swappable? (Choose two.)

• A. mezzanine card
• B. PCle slot
• C. internal cooling fan
• D. power supply
• E. memory riser

Question No. 4

Which three items must be configured in the Port Profile Client in Cisco Unified Computing System Manager? (Choose three.)

• A. port profile
• B. DVS
• C. data center
• D. folder
• F. VMware vCenter IP address
• F. VM port group

Question No. 5

Which three options are true regarding port profiles in Cisco UCS Manager? (Choose three.)

• A. Port profiles define operating-system kernel parameters.
• B. Port profiles are represented as a port group in vCenter.
• C. Port profiles can be used by more than one DVS.
• D. Port profile parameters are visible on vCenter.
• F. Port profile parameters can be modified from vCenter.
• F. Port profiles can be modified only from Cisco UCS Manager.

Question No. 6

View the Exhibit.

Refer to the exhibit. Which two media types can you mount from the KVM console? (Choose two.)

• A. VHD
• B. ISO
• C. VMDK
• D. IMG
• E. VHDx

Question No. 7

Which Cisco solution addresses the challenge of managing multiple large-scale Cisco UCS domains by providing streamlined management of up to 10.000 servers across hundreds of sites?

• A. Cisco UCS Central
• B. Cisco UCS Director
• C. Cisco UCS Domain Manager
• D. Cisco UCS Manager

Question No. 8

The system-reserved VLANs within Cisco UCS are 3968 to 4048 by default. Where can a user change the starting value of this range?

• A. VLAN manager
• B. global policies
• C. LAN cloud
• D. cannot be changed

Question No. 9

You are creating service profiles for a Cisco UCS system by using the service profile wizard. You discover that you forgot to create the UUID pool.

What should you do?

• A. From the wizard, click Create UUID Suffix Pool.
• B. Pause the running wizard, and then start a temporary wizard to create a profile with the same name and the missing UUID pool. Resume the wizard, and then select the new UUID pool.
• C. Continue running the wizard. The service profile uses the burned-in UUID in the BIOS of the server.
• D. Stop the wizard, and then restart the wizard.